Wallet/ProductionLog

<< Wallet

Version	Date	Changelog	notes
1.1.1x	2007	First sketch of "complex trifold"	Paper prototype (scale ~1:1.8)
1.1.2x	2007		Paper prototype (scale ~1:1.8)
1.1.3x	2007		Paper prototype (scale ~1:1.8)
1.1.4x	2007		Paper prototype (scale ~1:1.6)
1.1.5x	2007		Paper prototype
1.1.6x	2007		Tyvek (fabric grade) prototype, taped.
1.1.7x	2007		Tyvek prototype, unassembled with 1.1.x and 1.2.x notes written on the design, this remains the base pattern for subsequent 1.1.x and 1.2.x manufactures
1.1.8z	2007		Tyvek (fabric grade) production
2.1.1x	2008	First sketch of "simple trifold"	Paper prototype (scale ~1:2.6)
2.1.2x	2008		Paper prototype (scale ~1:1.7)
2.1.3z	Feb 2008		Tyvek production. 12 march 2011: Has additional notes for 2.2.x
3.1.1xz	early July 2008	First sketch of "simple quadfold"	Tyvek prototype, used as production
1.1.9z	mid July 2008		Tyvek production, made for europe trip
3.1.2x	2008		Tyvek prototype.
3.1.2x	2008		Tyvek prototype.
3.1.3x	2008		Tyvek prototype.
3.1.4x	2008		Tyvek prototype.
1.1.10z	2008	First to use full tape outer shell. Black and red gaff shell	Tyvek production, made for Erin
1.2.1x	December 2008		Paper prototype. (scale ~1:1.6)
1.1.11z	May 2009		Tyvek production, for Sly, Black and blue gaff shell, but not sent because I had a better design made! Instead, it was archived, and pulled into my own use in May 2013 (replacing 1.2.2z). Note that version on card internally gives it incorrectly as 1.1.10p.
1.2.2z	30 May 2009		Tyvek production, Black and red gaff shell
2.2.1z	Mar 2011	Additional panels retained for structure. Tape used for stiffness	Tyvek production.
1.1.11z	June 2014		Addition of tape-lined foil in backing as NFC shield. Outer wing is not protected for transport cards. Inner two wings are.

• All tyvek use is paper grade from envelopes, unless otherwise noted.
• All prototypes are full-size unless otherwise noted